How to export playlist content to a folder

Posted on by

This is pretty easy.

Create a folder called D:\exportedsongs\

Open your playlist in notepad. Press CTRL+H to search and replace.

In the search field, type: D:\mp3\ This is the common folder your media is in.
In the replace field, type:  xcopy “D:\mp3\

Then perform the search and replace action.

Now, press CTRL+H to do another search and replace. This time, however:

In the search field, type: .mp3
In the replace field, type: .mp3″ “D:\exportedsongs\”

And perform the search and replace action.

Now, save the file you’ve just edited as export.bat and double click that file. The bat file now copies your media to the D:\exportedsongs folder.

This is a nifty little trick that makes you create a playlist with your favourite songs and then copy the same songs to a folder, allowing you to take them with you on a portable media player or another computer.

What the .bat file now does is use xcopy on every single entry in the playlist.
Which will look like this: xcopy “D:\source folder\file1.mp3” “D:\destination folder\file1.mp3”

Low power two harddrive server at 25 W

Posted on by

A small home multi purpose server or NAS using no more than 25 W.

Prelude:
I’ve been wanting to build myself a little server for months now. Ever since I’ve got rid of my old Pentium 233 MHz server with a singel 60 GiB harddrive.
It’s nice to have a machine running 24/7 so you can grab any data from any client in the house. It simplifies backup and allows for easier exchange of files.
Since I’m a student, the budget packet quite well from time to time, so economy was important. Especially in terrms of ownership. Realizing that electricity is costly these days, I’ve set a hard limit. The server couldn’t use more than 50 W/h.

The components
Intel recently released a new mainboard in the essential series. The Intel D945GSEJT desktop board. The board using the Mini-ITX form factor (170mm x 170 mm) and comes with some interresting specifications:

  • Atom N270 CPU (Single core w. hyperthreading)
  • 945GSE chipset
  • Integrated graphigs (Intel GMA950).
  • Max 2 GiB DDR2-5300 SO-DIMM RAM.
  • 1Gbps onboard ethernet
  • 2x SATA-150
  • 1x PATA
  • 1x Mini PCI-e connector
  • 1x PCI 32 bit (regular PCI v. 2.3)
  • Three onboard USB-plugs and four internal for front panel or rear panel header.
  • 2+2 Audio w. SP/DIF (requires header)
  • 2x RS232, 1x Parallel port

But what’s really interresting about the board is the power requirements. 12 Watts for the board only! Another important feature of the board is that it can be powered from a single 12 V/5A DC power brick. These are usually quite efficient (efficiency > 87%) and thus a perfectly good idea for a home server. No other motherboards that I could easily get a hold on came close to requiring this little power. I know about AMD’s Geode that uses only 5 W, but it’s also weaker in terms of processing power and only embedded HW distributers seems to be offering them, and not cheap! The Intel board however was about 120 USD, which seems fair.

You can find additional information on Intel’s website. I’m just writing why I chose the board.

I’ve also chosen to use two 1.5 TiB Western Digital Green power harddrives in RAID1 (mirror mode). I also do RAID in mirror mode as it provides the best data protection, and at a price of only about 130 USB/each, it’s arguably pretty stupid not to.

I’m also planning to buy a solid state drive (SSD) that goes into the Mini PCI-express connector, but I’m still uncertain if that would work. Google, weirdly enough, provides no answer to if it would work.

Everything is going to be put together in a Aopen A340 chassis, that I’ve also had laying around. The chassis comes with a power supply, but this is a 200 W model and will burn a lot of power into heat if you only draw like 10 % of it’s capacity, so this is eventually going to be removed and replaced by a more efficient 12 V/3.5 – 5 A power brick.

Test and assembly

The mainboard arrived in a brown bulk box, resonably protected. The board comes with two serial ATA cables, a powerplug that attaches on the mainboard and provides power to harddrives etc. when using a 12 Volt supply.

I haven’t actually bought the harddrives for the server yet, but I will in one of the coming days (or weeks). As for now, I’m just using a 300 GiB Maxtor Maxline III I found in my drawer.

Assembly was easy. Rear plate in place, four screws, plug in power, use a monitor/keyboard/mouse from another PC while you’re installing the software. I chose to install Ubuntu Linux from a bootable USB-stick. Linux is free and comes with support for sharing files/printers, well, pretty much everything with Windows clients. I also plan to install a webserver (Apache) and MySQL later.

Measurements

The only real measurement I’ve done so far is to measure the power draw. 12 W for the mainboard with no attached harddrives and about 10-13 W for each harddrive  (the Green power uses only about 7 W according to a lot of reviews) using a 12 V/3.5 A power brick from an LCD-screen. I have actually yet to buy one for the server, so I borrowed this one from my secondary workstation monitor.

Conclusion

A complete two disk home server for about 450 USD. Can’t say I’m not satisfied. The assembly took about half an hour while listening to music and being infocused, and the software installation about 10 minutes.

The best thing however, is the power reqirement. I don’t except the server to draw more than 25 Watts fully assembled with two modern disks. Perfect little server for the money.

Images

New on the blog

Posted on by

Ok. So i’m blogging now. I’m using the wordpress blog and so far, I’m quite impressed. The design is beautiful and stylish. Actually, even the editor i so sleek that. I’m glad I didn’t decide to build a blog of my own. Why would I when this exists?

I’m looking forward to be doing posts on this site. You should be warned already, that this is just another personal blog, and I’m just another anomouys person writing, so the content may be of interrest of bore the cr*p of you. I’m just happy to write stuff.

The stuff will probably be replacing the silly headlines you can do on fb and twitter. To be honest, they’re so utterly unimportant, but this page allows me to go more indepth ie. to use as a developer (I’m a developer) and get perhaps one day even have a reply if I’ve done something well. Let’s see.

See you? 🙂